SciELO - Scientific Electronic Library Online

 
vol.7 número2O patosistema Fusarium oxysporum f. sp. ciceris/Cicer arietinum: um modelo de evolução de fungos fitopatogênicos de plantas em raças e patótiposGenótipos G e P de rotavirus encontrados em crianças acometidas de diarréia na costa norte da Colômbia índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Em processo de indexaçãoCitado por Google
  • Não possue artigos similaresSimilares em SciELO
  • Em processo de indexaçãoSimilares em Google

Compartilhar


International Microbiology

versão impressa ISSN 1139-6709

INT. MICROBIOL. vol.7 no.2  Jun. 2004

 

RESEARCH ARTICLE
 

 

 

Alberto González-Novo1
Javier Jiménez1*
M. Jesús García1
Inmaculada Ríos-Serrano2
Jesús Pla2
Antonio Jiménez3
Miguel Sánchez Pérez1

1Institute for Biochemical
Microbiology, University of
Salamanca-CSIC, Spain
2Microbiology Department,
Microbiology II, Faculty of
Pharmacy, Complutense University
of Madrid, Spain
3Medicine Department, Faculty of
Medicine, University of
Salamanca, Spain

Dynamics of CaCdc10, a septin of Candida albicans, in living cells and during infection

 

Summary. The morphogenetic program in the pathogenic fungus Candida albicans, including the dimorphic transition, is an interesting field of study, not only because it is absent in the commonly used model yeast Saccharomyces cerevisiae, but because of the close relationship between hyphal development and virulence of C. albicans. We studied one of the most important aspects of fungal morphogenesis-the septin ring-in C. albicans. By using a fusion construct to green fluorescent protein (GFP), the subcellular localization and dynamics of C. albicans Cdc10 in the different morphologies that this fungus is able to adopt was identified. The localization features reached were contrasted and compared with the results obtained from Candida cells directly extracted from an animal infection model under environmental conditions as similar as possible to the physiological conditions encountered by C. albicans during host infection. [Int Microbiol 2004; 7(2):105-112]

Key words: Candida albicans · dimorphism · septin Cdc10 · systemic infection

Received 28 October 2003
Accepted 15 December 2003

 

*Corresponding author:
Javier Jiménez
Departamento de Microbiología y Genética
Instituto de Microbiología y Bioquímica
Universidad de Salamanca-CSIC
Av. Doctores de la Reina, s/n
37007 Salamanca, Spain
Tel. +34-923294400. Fax +34-923224876
E-mail: javierj@usal.es
 

 


Dinámica de CaCdc10, una septina de Candida albicans, durante el proceso de infección y en células cultivadas in vitro

Resumen. La morfogénesis del hongo patógeno Candida albicans, incluyendo el fenómeno de transición dimórfica, es un interesante campo de estudio, no sólo por estar ausente en Saccharomyces cerevisiae, que es el modelo habitual de levadura en los estudios morfogenéticos, sino por la correlación existente entre virulencia y filamentación en C. albicans. Este trabajo describe el estudio de uno de los aspectos fundamentales de la morfogénesis fúngica, el anillo de septinas, en C. albicans. Usando el método de fusión con la proteína verde fluorescente (GFP), se identificó la localización subcelular y la dinámica de la septina Cdc10 de Candida albicans en las diferentes formas que puede adoptar este hongo. Los datos obtenidos se compararon y contrastaron con los logrados al extraer las células de Candida directamente de ratones previamente infectados con dicho hongo, en condiciones ambientales lo más parecidas posible a las condiciones fisiológicas que Candida encuentra al infectar un huésped. [Int Microbiol 2004; 7(2):105-112]

Palabras clave: Candida albicans · dimorfismo · septina Cdc10 · infección sistémica

 
Dinâmica de CaCdc10, uma septina de Candida albicans, durante o processo de infecção e em células cultivadas in vitro

Resumo. A morfogênesis do fungo patogênico Candida albicans, incluindo o fenômeno de transição dimórfica, é um interessante campo de estudo, não só por estar ausente em Saccharomyces cerevisiae, que é o modelo habitual de leveduras nos estudos morfogenéticos, como também devido à correlação existente entre a virulência e a formação de hifa em C. albicans. O presente trabalho descreve o estudo de um dos aspectos fundamentais da morfogênesis fúngica, o anel de septinas, em C. albicans. Usando o método de fusão com a proteína verde fluorescente (GFP), foi observada a localização subcelular e a dinâmica da septina Cdc10 de Candida albicans nas diferentes formas que este fungo pode adotar. Os dados obtidos foram comparados e contrastaram com os obtidos ao extrair as células de Candida diretamente de modelos de infecção animal com o referido fungo, realizados em condições ambientais o mais semelhante possível às condições fisiológicas que Candida encontra ao infectar um hospedeiro. [Int Microbiol 2004; 7(2):105-112]

Palavras chave: Candida albicans · dimorfismo · septina Cdc10 · infecção sistêmica

 

Introduction

Candida albicans is the most prevalent pathogenic fungus that affects humans, producing superficial mucosal or systemic infections in immunocompromised patients [16]. C. albicans is able to grow in a broad variety of forms: budding yeast, pseudohyphae (elongated chained cells bearing constrictions between each cell), and hyphae (long homogeneous tubes with no constrictions). It can also switch between these forms in response to external conditions, such as temperature, pH, the presence of serum or macrophages, and certain synthetic culture media [7,41]. The importance of studying hyphal development in Candida is supported by the close relationship between this growth form and its virulence [41]. It is clear that the genetic program responsible for the morphologies of Candida must be different and unique in each form [37]. This, together with the fact that the most widely employed yeast model for morphogenetic studies, Saccharomyces cerevisiae, lacks true hyphal development, make C. albicans an appropriate organism for the analysis of such a morphogenetic program. (For a recent review of Candida facts see [4].)

In S. cerevisiae, one of the key elements in morphogenesis is the septin family, a group of seven proteins. Two of them, Srp3 and Srp28, are produced during the sporulation program of development [12,18]. The other five, encoded by CDC3, 10, 11, 12 and SEP7, are expressed during the mitotic cell cycle and their products assemble in vivo at the mother-daughter neck, forming the so-called 10-nm ring [8,21,25,29]. These proteins are found in many organisms from yeast to mammals, includingflies, worms and mice [17,30,40]. The septin-based ring has been found to be deeply involved in events very important to the cell, including the selection of cell polarity [2,9], chitin deposition at the septum [13], the establishment of the morphogenesis checkpoint [38,39], the spatial localization of the septation machinery at cytokynesis [5,33], and the formation of a barrier separating mother and daughter cells in order to regulate polarity and morphogenesis of the cell [3,48]. (For a recent review on septins see [19].

In S. cerevisiae, septin ring assembly is dependent on START accomplishment in the G1 phase of the cell cycle [10]. It appears as a single ring structure on the mother side of the neck. The ring is kept in that position, with a symmetric neck-spanning morphology, until anaphase, when it splits into a double ring, depending on the state of Clb degradation and CDK inactivation [10]. Recently, the small GTPase Tem1 has been proposed to be essential in this process for the control of septin dynamics during cytokinesis [34].

In C. albicans, following the pioneer studies of Byers and Goestch [8], a ring at submembrane level in the mother bud junction was localized by transmission electron microscopy [46]. These authors also detected this structure in the mycelial form of Candida, where it was related to the septation process. More recently, the septin ring in this fungus has been detected by employing antibodies that specifically recognize the septin Cdc11 from S. cerevisiae [46] and by GFP fusions to CaCdc3 and CaCdc10 [22,50] (hereafter, to avoid confusion, C. albicans genes or proteins will be referred to using the prefix "Ca-"). Here we report the localization and dynamics of the septin structures. The physiological significance of the results obtained, both in the "in living cells" approach of this work and in other septin localization reports, has been corroborated here by studying septin localization during host infection.

Materials and methods

Strains, media and culture conditions. The S. cerevisiae strains used were VCY1, bearing the thermo-sensitive allele cdc10-11, and the respective isogenic wild-type strain 1783. Dr. Víctor J. Cid kindly supplied both. The C. albicans strain used was CAI4 (ura3::imm434/ura3::imm434) [20]. For general purposes, yeasts were grown in 250-ml flasks containing 50 ml yeast peptone dextrose (YPD) (2% glucose, 1% yeast extract, and 2% peptone, w/v) or SD (1.7 gDifco nitrogen base without amino acids/l; 0.5% ammonium sulfate and 2% glucose, w/v) plus the required amino acids for plasmid maintenance. For the induction of hyphae and pseudohyphae in C. albicans, 10 and 5% (v/v) fetal calf serum was added to the culture media, respectively. The Lee's, Spider and SLAD media were as described, respectively, in [24,32,35]. Yeast growth temperatures were 28ºC for general purposes and 37ºC for expression of the phenotype in Ts mutant strains or induction of the filamentous morphology. The pseudohyphal morphology was induced at 35ºC.

Mouse strains and infection model. The mice strains employed in the infection model were DBA/2, Balb/C (Charles Breeding Laboratories, Wilmington, MA) and CD1. The animals were infected through the lateral tail vein. In DBA/2, 4 × 106 C. albicans cells were injected whereas the more resistant Balb/C and CD1 mouse strains, were injected with 4 × 107 cells. Mice were killed 24-48 h after infection; kidneys and brains were extracted, homogenized and washed with PBS buffer.

DNA manipulations. Except where specified, standard procedures were used for DNA manipulation [43]. C. albicans transformations were carried out using a combination of the electroporation and lithium acetate methods [31]. Genomic DNA from CAI4 C. albicans strain was obtained as described elsewhere [44]. The oligonucleotides (supplied by Isogen, Maassen, Netherlands) used for sequencing, PCR, or the genomic CaCdc10 fusion to green fluorescent protein (GFP), are listed in Table 1 (the restriction enzyme sequences inserted to facilitate cloning and manipulation are indicated).


The plasmid bearing GFP3 and optimized for the genetic code of C. albicans has been described in [11] and plasmids bearing the cassette for GFP tagging directly to the chromosome have been described in [23]. pIR4 is a plasmid based on the pRM1 plasmid [42], containing CaURA3 and CaLEU2 as selectable markers and the ARS2 sequence. pRI4 was constructed by cloning the actin promoter (ACT-p) into the BamHI/HindIII site of pRM1 plasmid.

Staining procedures and microscopy. Time-lapse microscopy was carried out using a Leica DMRXA fluorescence microscope, to which a thermostatted device (supplied by Linkam, Surrey, UK) had previously been fitted in order to maintain the cells at a temperature suitable for the morphological switch. Cells were grown overnight at 28ºC, plated onto a thick layer of adequate medium [26], and subsequently kept at a constant temperature while examined using a thermostatted microscope. The cells of interest were followed, and photographed when interesting morphological changes occurred. The microscope slide was located on the heater device at 28, 35 or 37ºC in order to observe the different morphologies. Nuclei staining was as follows: 4 ml of cells was spread out on a slide, allowed to dry. They were then resuspended in 2.5 µl of DAPI solution (2.5 µg/ml) and mounted for observation.

Cloning of CaCDC10. CaCDC10 had been previously cloned by suppression of a S. cerevisiae septin mutant [14]. The sequence was entered into the EMBL database under the accession number Z25870. CaCDC10 was cloned by PCR, employing the primers CaCDC10UP and CaCDC10RP (see above). The cloned DNA fragment was able to suppress a cdc10-11 S. cerevisiae mutant strain (data not shown).

Green fluorescent protein fusions to CaCDC10. In all fusions, GFP was placed at the carboxy terminus of CaCdc10. Two prolines were inserted between both proteins in order to preserve their correct folding. The pAG1 plasmid, in which the CaCdc10-GFP fusion was generated, is based on the pIR4 plasmid, which carries the ACT1 promoter and a C. albicans ARS sequence. GFP3 was previously obtained by PCR, using GFP3UP and GFP3LW as primers and the plasmid pYGFP3 as template (kindly supplied by Dr. Brendan P. Cormack). The PCR product was SmaI/StuI-digested and cloned into the SmaI site of pIR4. pAG1 was digested again with SmaI, and the CaCDC10 ORF (previously obtained by PCR and confirmed by sequencing) was introduced at this site, affording plasmid pAG2. This plasmid thus bore the CaCDC10-GFP fusion under control of the ACT1 promoter. It was designed to enable genome integration at the LEU2 locus. In such experiments (data not shown), pAG2 was introduced into the C. albicans genome at the LEU2 locus by digestion of pAG2 with KpnI and linear transformation with the CAI4 strain.

The fusion under the control of the CaCDC10 self-promoter was developed by PCR amplification of the CaCDC10 ORF plus 500 bp upstream from the ATG of the gene. The oligonucleotides used were CaCDC10UP and CaCDC10RP (see above). This DNA fragment was introduced into the pGEMT plasmid, digested with SmaI and inserted into the SmaI site of pAG1, affording the CaCDC10-GFP fusion under the control of the CaCDC10 self-promoter. The chromosome fusion in strain CAI4 was developed following the method described in [23], employing the tagCDC10UP and tagCDC10RP oligonucleotides (see above).

Results

Fusion of CaCDC10 to GFP. Four different kinds of fusions were developed (see Materials and methods). The localization results obtained employing the different fusions were very similar in all experiments; differences were only detected in the proportion of cells showing the GFP-signal but not in its subcellular distribution. This proportion was almost 100% in the case of integration in the LEU2 locus and 80% in the case of the self-replicative plasmid. Regarding the promoter employed, the only remarkable difference was a fainter signal when the self-promoter was employed, but identical dynamics and distribution were observed in each case. In order to obtain a better signal, mainly in the time-lapse assays (detailed below), and to avoid bleaching of GFP fluorescence during the prolonged ultraviolet illumination, only the fusion in the self-replicative plasmid under the control of the ACT1 promoter was followed.

Localization of CaCdc10 in the different morphology patterns of C. albicans. Plasmid pAG2 bearing the CaCDC10-GFP3 fusion under the control of the ACT1 promoter was introduced into C. albicans strain CAI4 [20]. The transformants were grown under conditions that enabled a budding morphology (detailed in Materials and methods). Time-lapse microscopy assays revealed that, before a bud is formed, a ring of CaCdc10 is joined at the area of hottest polarity (Fig. 1A, blunt arrows). The new bud emerges through the septin ring (Fig. 1A, 3rd image from the left). During bud growth, the GFP signal becomes diffuser and broader, extending along the boundary between both cells. Finally, the GFP signal is seen as a double ring (Fig. 1A, arrows), but only when the nuclei are completely separated, indicating that anaphase of the cell cycle has been accomplished, as observed with DAPI and GFP double staining (Fig. 2).



Next, we studied the septin-ring dynamics in hyphal morphology by inducing hyphae production in C. albicans strain CAI4 (transformed with pAG2 plasmid). The process was followed by time-lapse microscopy and the results are shown in Fig. 1C, D. In this morphology, the first septin ring was found inside the germ tube but at the mother cell/germ tube junction. This ring followed a trend similar to the one observed in budding cells (see above); first, the appearance of a single ring that becomes diffuse followed by the formation of a double ring (Fig. 1D). At the mother/germ tube junction, as described for CaCdc10 and CaCdc11 [46,50], a septin structure that was not as organized as rings, and that was much fainter, was observed. This "pseudo-ring" was seen just prior to the emergence of the germ tube and disappeared when the first proper septin ring was assembled several micrometers inside the germ tube (Fig. 1C). In order to demonstrate that CaCdc10-septin rings mark the septum within the cylindrical hyphal structure, the septum was co-stained with GFP and calcofluor white (a specific dye for chitin). The two signals colocalized at the same point of the hyphae (data not shown). Furthermore, co-staining hyphae with calcofluor white and DAPI revealed a single nucleus between every two chitin signals (data not shown).

The pseudohyphal pattern of growth was studied next. C. albicans cells harboring pAG2 were grown, pseudohyphal development was induced, and the cells were analyzed by time-lapse microscopy. The results are shown in Fig. 1B, in which the appearance of the septin scaffold just before the emergence of the bud can be appreciated (blunt arrows). These results are similar to those seen in the budding behavior (described above). Subsequently, the septin ring splits into a double ring (Fig. 1B, arrows). Finally, when the cell cycle round is finished, the septin structure is slowly disorganized. However, in our experiments there was a short period of time in which the septin rings from two different cell cycle rounds co-existed.

Localization of CaCdc10 in an animal infection model. With a view to reducing interferences arising from the "in vitro" incubation and culture of C. albicans cells, and to better reproduce the environmental conditions encountered by C. albicans during host infection, the septin localization assays were repeated in a mouse infection model. To do so, mice were injected through the lateral tail vein with cells of C. albicans bearing the CaCDC10-GFP fusion, as detailed in Materials and methods. The three different mouse strains employed (Balb/c, DBA/2 and CD1) orchestrate a TH1 protective immune response, a TH2 non-protective immune response, and an intermediate response, respectively [15]. There was no remarkable difference, in terms of virulence, between Candida strains with or without the CaCdc10-GFP fusion (data not shown). Also, regarding organ colonization, cell morphology, or hyphae vs. pseudohyphae proportions, no differences were found between the different mouse strains employed (data not shown).

Candida cells obtained directly from the kidneys and brains of the mice were observed directly for GFP staining. In these experiments, the GFP signal was poor, probably due to the exposure of GFP to the high body temperature of the animals for long periods of time. Nonetheless, the GFP signal was localized to the typical single and double ring very similar to the results described above for hyphal morphology (Fig. 3A). However, in kidneys and in brains, the GFP signal was associated with all the septin rings in all the septa of the hyphae. This was a clear difference to the results obtained previously in the "in living cells" experiments, in which the septin signal was only detected in one area of the septum, ie. the area that is active, in terms of polarity, at that time. Similar results were recorded when hyphal development was induced by growing the cells in Lee's medium (Fig. 3B); under these conditions, the CaCdc10 signal remains visible in all the septa of the hyphae but to a lesser extent. This was not the case when cells were grown in Spider or SLAD medium or in other artificial culture media detailed before (data not shown and Fig. 1D)


Discussion

Subcellular localization of CaCdc10, a septin from C. albicans. Several proteins of the septin structure have been localized in C. albicans: CaCdc11, by immunolocalization, employing antibodies generated against S. cerevisiae Cdc11 [46]; CaCdc3, by a GFP fusion [22], and, in this work, CaCdc10, by a GFP fusion [50]. However, the results presented here are the only ones in which the dynamics of this protein were studied by time-lapse assays. The localization data obtained by other investigators and by our own group point to some interesting differences, such as the absence of Cdc3 at the base of the germ tube projections, a site where Sudbery, Warenda and Konopka, and our group were able to detect Cdc11 and Cdc10. The structure visualized in that localization differs from the typical single or double ring into which septins are organized; it is more diffuse and relaxed, and is only short-lived (detailed below). All these observations support the possibility that different molecular structures and/or compositions can be assigned to this structure and to the 10-nm ring.

The dynamics of the septin ring structure are the same during the budding cycle in both S. cerevisiae [10] and C. albicans, as detailed in Results. The data presented here also support the notion of a conserved role for the septin structure in both organisms.

C. albicans as a model for the study of hyphal morphogenesis. In special media or under certain environmental conditions, S. cerevisiae is able to grow in a pseudohyphal fashion [24] but not with a true hyphal pattern of growth. Interestingly, the hypha is the morphology adopted by C. albicans when it infects host tissues [41]. In this context, it is generally accepted that C. albicans virulence is closely related to its ability to develop mycelia [15,37]. There are exceptions to this assumption, however, as is the case of hog1 mutants in the MAP kinase CaHog1 or mutants in the CaTup1 regulator, both of which show a hyper-filamentous phenotype and reduced virulence [1,6]. These features make C. albicans an interesting model for the study of morphogenesis during hyphal development. A clue to morphogenesis is the septin-based cytoskeleton. The study of this structure in hyphal development reveals dynamics similar to those previously discussed for budding forms. However, some interesting differences were detected, such as the existence of a "faint septin structure" that appears at the base of the germ tubes, as first described by Sudbery [46]. The existence of this structure supports the idea of the central role played by septins in all polarized patterns of development [36,38].

Based on this hypothesis, it is tempting to speculate that, when a particular pattern of morphogenesis is initiated (germ tube emission), it must be supported by the corresponding septin-based cytoskeleton, such as the "faint signal". In keeping with this idea, the existence of a relationship between the structure in which septins are assembled and the morphology shown by the new cell can be suggested.

Localization of CaCdc10 of C. albicans during the infection of a host. The signals and stimuli required by C. albicans to switch morphologies are very complex and are not fully understood. Thus, in order to reproduce as much as possible the conditions encountered by C. albicans during the infection process, the localization of CaCdc10 was studied in cells extracted directly from a host, without subsequent incubation in culture media. This is the first report of the localization of a GFP-tagged protein in an animal infection model. The results obtained in all host mouse strains and in all the organs analyzed were identical: no differences in septin localization or structure were detected with respect to the different immune responses orchestrated by the different mouse strains employed or by the different accessibility of C. albicans to the mouse organs assayed.

The most impressive difference between the "in living cells" and during infection assays was the persistence of septin localization during several rounds of the cell cycle in the hyphae extracted from the host; in other words, the double ring is not disassembled when the next ring is settled. Thus, it is possible to find C. albicans hyphae showing several double septin rings. In S. cerevisiae, Smt3/SUMO has been described to be involved in the covalent modification of septins [27], and Siz1, an E-3 type enzyme responsible for the conjugation of Smt3 to the septins, has also been described [28,47]. Both proteins, as well as others described in different organisms [45], are involved in the turnover of the old septin structure. It would obviously be of great interest to explore the existence of these proteins in C. albicans and, if they were found, why they fail to function when C. albicans hyphae are present in the host. Other interesting alternatives are suggested in [49]. These authors described, in S. cerevisiae, the Cdc28-kinase-dependent phosphorylation of Cdc3 for correct septin ring degradation during G1. Therefore, understanding the function of CaCdc28 during infection of the host would no doubt shed light on the differences in septin structure described here.

Acknowledgements. We would like to acknowledge Carmen Castro for help in microscopy as well as technical assistance; Victor J. Cid for supplying the S. cerevisiae VCY1 and 1783 strains; Judith Berman and Jaime Correa for PCR-based fusion plasmids; Brendan P. Cormack for GFP3, Federico Navarro for thousands of Candida details, and David González for grammar and style corrections. We also would like to thank the laboratory of Dr. Miguel Sánchez for their help, patience and understanding. This work was supported by a FEDER project from the European Union (Ref: IFD97-1897-CO2-01) and a CICYT project from the Spanish Science and Technology Ministry (Ref: BIO2001-1345-C02-02).

References

1. Alonso-Monge R, Navarro-Garcia F, Molero G, Diez-Orejas R, Gustin M, Pla J, Sanchez M, Nombela C (1999) Role of the mitogen-activated protein kinase Hog1p in morphogenesis and virulence of Candida albicans. J Bacteriol 181:3058-3068        [ Links ]

2. Barral Y, Parra M, Bidlingmaier S, Snyder M (1999) Nim1-related kinases coordinate cell cycle progression with the organization of the peripheral cytoskeleton in yeast. Genes Dev 13:176-187        [ Links ]

3. Barral Y, Mermall V, Mooseker MS, Snyder M (2000) Compartmentalization of the cell cortex by septins is required for maintenance of cell polarity in yeast. Mol Cell 5:841-851        [ Links ]

4. Berman J, Sudbery PE (2002) Candida albicans: A molecular revolution built on lessons from budding yeast. Nat Rev Genet 3:918-930        [ Links ]

5. Bi E, Maddox P, Lew DJ, Salmon ED, McMillan JN, Yeh E, Pringle JR (1998) Involvement of an actomyosin contractile ring in Saccharomyces cerevisiae cytokinesis. J Cell Biol 142:1301-1312        [ Links ]

6. Braun BR, Head WS, Wang MX, Johnson AD (2000) Identification and characterization of TUP1-regulated genes in Candida albicans. Genetics 156:31-44        [ Links ]

7. Brown AJ, Gow NA (1999) Regulatory networks controlling Candida albicans morphogenesis. Trends Microbiol 7:333-338        [ Links ]

8. Byers B, Goetsch L (1976) A highly ordered ring of membrane-associated filaments in budding yeast. J Cell Biol 69:717-721        [ Links ]

9. Chant J, Mischke M, Mitchell E, Herskowitz I, Pringle JR (1995) Role of Bud3p in producing the axial budding pattern of yeast. J Cell Biol 129:767-778        [ Links ]

10. Cid VJ, Adamikova L, Sanchez M, Molina M, Nombela C (2001) Cell cycle control of septin ring dynamics in the budding yeast. Microbiology 147:1437-1450        [ Links ]

11. Cormack BP, Bertram G, Egerton M, Gow NA, Falkow S, Brown AJ (1997) Yeast-enhanced green fluorescent protein (yEGFP) a reporter of gene expression in Candida albicans. Microbiology 143:303-311        [ Links ]

12. De Virgilio C, DeMarini DJ, Pringle JR (1996) SPR28, a sixth member of the septin gene family in Saccharomyces cerevisiae that is expressed specifically in sporulating cells. Microbiology 142:2897-2905        [ Links ]

13. DeMarini DJ, Adams AE, Fares H, De Virgilio C, Valle G, Chuang JS, Pringle JR (1997) A septin-based hierarchy of proteins required for localized deposition of chitin in the Saccharomyces cerevisiae cell wall. J Cell Biol 139:75-93        [ Links ]

14. DiDomenico BJ, Brown NH, Lupisella J, Greene JR, Yanko M, Koltin Y (1994) Homologs of the yeast neck filament associated genes: isolation and sequence analysis of Candida albicans CDC3 and CDC10. Mol Gen Genet 242:689-698        [ Links ]

15. Diez-Orejas R, Molero G, Navarro-Garcia F, Pla J, Nombela C, Sanchez-Perez M (1997) Reduced virulence of Candida albicans MKC1 mutants: a role for mitogen-activated protein kinase in pathogenesis. Infect Immun 65:833-837        [ Links ]

16. Edmond MB, Wallace SE, McClish DK, Pfaller MA, Jones RN, Wenzel RP (1999) Nosocomial bloodstream infections in United States hospitals: a three-year analysis. Clin Infect Dis 29:239-244        [ Links ]

17. Fares H, Peifer M, Pringle JR (1995) Localization and possible functions of Drosophila septins. Mol Biol Cell 6:1843-1859        [ Links ]

18. Fares H, Goetsch L, Pringle JR (1996) Identification of a developmentally regulated septin and involvement of the septins in spore formation in Saccharomyces cerevisiae. J Cell Biol 132:399-411        [ Links ]

19. Faty M, Fink M, Barral Y (2002) Septins: a ring to part mother and daughter. Curr Genet 41:123-131        [ Links ]

20. Fonzi WA, Irwin MY (1993) Isogenic strain construction and gene mapping in Candida albicans. Genetics 134:717-728        [ Links ]

21. Ford SK, Pringle JR (1991) Cellular morphogenesis in the Saccharomyces cerevisiae cell cycle: localization of the CDC11 gene product and the timing of events at the budding site. Dev Genet 12:281-292        [ Links ]

22. Gale C, Gerami-Nejad M, McClellan M, Vandoninck S, Longtine MS, Berman J (2001) Candida albicans Int1p interacts with the septin ring in yeast and hyphal cells. Mol Biol Cell 12:3538-3549        [ Links ]

23. Gerami-Nejad M, Berman J, Gale CA (2001) Cassettes for PCR-mediated construction of green, yellow, and cyan fluorescent protein fusions in Candida albicans. Yeast 18:859-864        [ Links ]

24. Gimeno CJ, Ljungdahl PO, Styles CA, Fink GR (1992) Unipolar cell divisions in the yeast S. cerevisiae lead to filamentous growth: regulation by starvation and RAS. Cell 68:1077-1090        [ Links ]

25. Haarer BK, Pringle JR (1987) Immunofluorescence localization of the Saccharomyces cerevisiae CDC12 gene product to the vicinity of the 10-nm filaments in the mother-bud neck. Mol Cell Biol 7:3678-3687        [ Links ]

26. Jimenez J, Cid VJ, Cenamor R, Yuste M, Molero G, Nombela C, Sanchez M (1998) Morphogenesis beyond cytokinetic arrest in Saccharomyces cerevisiae. J Cell Biol 143:1617-1634        [ Links ]

27. Johnson ES, Blobel G (1999) Cell cycle-regulated attachment of the ubiquitin-related protein SUMO to the yeast septins. J Cell Biol 147:981-994        [ Links ]

28. Johnson ES, Gupta AA (2001) An E3-like factor that promotes SUMO conjugation to the yeast septins. Cell 106:735-744        [ Links ]

29. Kim HB, Haarer BK, Pringle JR (1991) Cellular morphogenesis in the Saccharomyces cerevisiae cell cycle: localization of the CDC3 gene product and the timing of events at the budding site. J Cell Biol 112:535-544        [ Links ]

30. Kinoshita M, Kumar S, Mizoguchi A, Ide C, Kinoshita A, Haraguchi T, Hiraoka Y, Noda M (1997) Nedd5, a mammalian septin, is a novel cytoskeletal component interacting with actin-based structures. Genes Dev 11:1535-1547        [ Links ]

31. Kohler GA, White TC, Agabian N (1997) Overexpression of a cloned IMP dehydrogenase gene of Candida albicans confers resistance to the specific inhibitor mycophenolic acid. J Bacteriol 179:2331-2338        [ Links ]

32. Lee KL, Buckley HR, Campbell CC (1975) An amino acid liquid synthetic medium for the development of mycelial and yeast forms of Candida albicans. Sabouraudia 13:148-153        [ Links ]

33. Lippincott J, Li R (1998) Sequential assembly of myosin II, an IQGAP-like protein, and filamentous actin to a ring structure involved in budding yeast cytokinesis. J Cell Biol 140:355-366        [ Links ]

34. Lippincott J, Shannon KB, Shou W, Deshaies RJ, Li R (2001) The Tem1 small GTPase controls actomyosin and septin dynamics during cytokinesis. J Cell Sci 114:1379-1386        [ Links ]

35. Liu H, Kohler J, Fink GR (1994) Suppression of hyphal formation in Candida albicans by mutation of a STE12 homolog. Science 266:1723-1726. Erratum in Science 1995, 267:17        [ Links ]

36. Liu H (2001) Transcriptional control of dimorphism in Candida albicans. Curr Opin Microbiol 4:728-735        [ Links ]

37. Lo HJ, Kohler JR, DiDomenico B, Loebenberg D, Cacciapuoti A, Fink GR (1997) Nonfilamentous C. albicans mutants are avirulent. Cell 90:939-949        [ Links ]

38. Longtine MS, Theesfeld CL, McMillan JN, Weaver E, Pringle JR, Lew DJ (2000) Septin-dependent assembly of a cell cycle-regulatory module in Saccharomyces cerevisiae. Mol Cell Biol 20:4049-4061        [ Links ]

39. McMillan JN, Longtine MS, Sia RA, Theesfeld CL, Bardes ES, Pringle JR, Lew DJ (1999) The morphogenesis checkpoint in Saccharomyces cerevisiae: cell cycle control of Swe1p degradation by Hsl1p and Hsl7p. Mol Cell Biol 19:6929-6939        [ Links ]

40. Nguyen TQ, Sawa H, Okano H, White JG (2000) The C. elegans septin genes, unc-59 and unc-61, are required for normal postembryonic cytokineses and morphogenesis but have no essential function in embryogenesis. J Cell Sci 113:3825-3837        [ Links ]

41. Odds FC (1988) Candida and Candidosis. Bailliére Tindall, London        [ Links ]

42. Pla J, Perez-Diaz RM, Navarro-Garcia F, Sanchez M, Nombela C (1995) Cloning of the Candida albicans HIS1 gene by direct complementation of a C. albicans histidine auxotroph using an improved double-ARS shuttle vector. Gene 165:115-120        [ Links ]

43. Sambrook RA (2001) Molecular Cloning, a Practical Approach, Cold Spring Harbor Laboratory Press, Cold Spring Harbor, New York        [ Links ]

44. Sherman FF, G. R. and Hicks JB (1986) Methods in Yeast Genetics, Cold Spring Harbor Laboratory Press, Cold Spring Harbor, New York        [ Links ]

45. Shih HP, Hales KG, Pringle JR, Peifer M (2002) Identification of septin-interacting proteins and characterization of the Smt3/SUMO-conjugation system in Drosophila. J Cell Sci 115:1259-1271        [ Links ]

46. Sudbery PE (2001) The germ tubes of Candida albicans hyphae and pseudohyphae show different patterns of septin ring localization. Mol Microbiol 41:19-31        [ Links ]

47. Takahashi Y, Kahyo T, TohEA, Yasuda H, Kikuchi Y (2001) Yeast Ull1/Siz1 is a novel SUMO1/Smt3 ligase for septin components and functions as an adaptor between conjugating enzyme and substrates. J Biol Chem 276:48973-48977        [ Links ]

48. Takizawa PA, DeRisi JL, Wilhelm JE, Vale RD (2000) Plasma membrane compartmentalization in yeast by messenger RNA transport and a septin diffusion barrier. Science 290:341-344        [ Links ]

49. Tang CS, Reed SI (2002) Phosphorylation of the septin Cdc3 in G1 by the Cdc28 kinase is essential for efficient septin ring disassembly. Cell Cycle 1:42-49        [ Links ]

50. Warenda AJ, Konopka JB (2002) Septin function in Candida albicans morphogenesis. Mol Biol Cell 13:2732-2746        [ Links ]

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons