SciELO - Scientific Electronic Library Online

 
vol.59 número1Declaración de Sant Joan d'Alacant en defensa del Acceso Abierto a las publicaciones científicas, del grupo de editores de revistas españolas sobre ciencias de la salud (GERECS)Barreras para la implementación de la cosmetovigilancia en Perú: modelo de Ecuaciones Estructurales usando de mínimos cuadrados parciales índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Ars Pharmaceutica (Internet)

versión On-line ISSN 2340-9894

Ars Pharm vol.59 no.1 Granada ene./mar. 2018  Epub 05-Dic-2022

https://dx.doi.org/10.30827/ars.v59i1.7274 

Artículos Originales

Development and characterization of a novel nano-liposomal formulation of Alendronate Sodium loaded with biodegradable polymer

Desarrollo y caracterización de una nueva formulación nano-liposómica de alendronato sódico con un polímero biodegradable

Heba F. Salem1  , Rasha M. Kharshoum1  , Mohamed Mahmoud1  , Saleh A. Azim2  , EL-Zeiny M. Ebeid2 

1Beni-Suef University, Egypt. Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy

2Tanta University, Egypt. Chemistry Department, Faculty of Science, Tanta, Egypt

ABSTRACT

Background:

Alendronate Sodium (ALDS) is the drug of choice for treatment of osteoporosis. However, 50% of the osteoporotic patients ceased the treatment within the first year due to its potential side effect on the gastrointestinal tract (GIT).

Objective:

The current study aimed to utilize nanotechnology to develop a nano-oral liposomal preparation containing biodegradable polymer (Starch) that enhance the drug prosperities.

Methods:

Nanoliposomes of ALDS were prepared using different concentrations of solubilized starch (0.1 - 0.5 g) by thin film hydration method. A new method of alendronate quantitative determination was used to overcome the obstacle of its determination by using a new highly sensitive derivatization method. The selected formula was visualized using TEM, in vitro release studies and Stability study was also carried out.

Furthermore, ulcerogenicity studies were performed to compare between the optimum prepared formula and a standard nonliposomal ALDS.

Results:

Six nano-oral liposomal formulations were prepared with zeta potentials ranging from -12 mV to -39 mV and a particle size ranging from 94 nm to 298 nm. The encapsulation efficiency studies demonstrated that the amount of ALDS entrapped within liposomes increased with increasing starch concentration. The stability studies confirmed the role of starch in increasing the stability of the prepared liposomes. In vitro release studies have demonstrated a relative delay in ALDS releases from the liposome core.

Ulcerogenicity studies proofed that the prepared formula has a significant gastric tolerance.

Conclusion:

a novel liposomal formula of ALDS was developed with better tolerability. However, further clinical investigations are necessary to evaluate its therapeutic effectiveness.

Keywords Liposome; Alendronate Sodium; starch; Ulcerogenicity studies

RESUMEN

Antecedentes:

El alendronato sódico (ALDS) es el fármaco de elección para el tratamiento de la osteoporosis. Sin embargo, el 50% de los pacientes osteoporóticos cesaron el tratamiento en el primer año debido a su posible efecto secundario en el tracto gastrointestinal (GIT).

Objetivo:

El presente estudio tiene como objetivo utilizar la nanotecnología para desarrollar una preparación liposomal nano-oral que contiene polímero biodegradable (almidón) que mejoran la prosperidad de la droga. Métodos: Se prepararon nanoliposomas de ALDS utilizando diferentes concentraciones de almidón solubilizado (0,1 - 0,5 g) mediante un método de hidratación de película delgada. Se utilizó un nuevo método de determinación cuantitativa de alendronato para superar el obstáculo de su determinación utilizando un nuevo método de derivatización altamente sensible. La fórmula seleccionada se visualizó utilizando TEM, estudios de liberación in vitro y se realizó también un estudio de estabilidad. Además, los estudios de ulcerogenicidad se realizaron para comparar entre la fórmula óptima preparada y un estándar no liposomal ALDS.

Resultados :

Se prepararon seis formulaciones liposomales nano-orales con potenciales zeta que oscilaban entre -12 mV y -39 mV y un tamaño de partícula que variaba de 94 nm a 298 nm. Los estudios de eficacia de la encapsulación demostraron que la cantidad de ALDS atrapada dentro de los liposomas aumentaba con el aumento de la concentración de almidón. Los estudios de estabilidad confirmaron el papel del almidón en el aumento de la estabilidad de los liposomas preparados. Los estudios de liberación in vitro han demostrado un retraso relativo en las liberaciones de ALDS del núcleo de liposomas. Los estudios de ulcerogenicidad demostraron que la fórmula preparada tiene una tolerancia gástrica significativa.

Conclusión:

se desarrolló una nueva fórmula liposomal de ALDS con mejor tolerabilidad. Sin embargo, otras investigaciones clínicas son necesarias para evaluar su efectividad terapéutica.

Palabras clave Liposoma; Alendronato Sodio; almidón; Estudios de ulcerogenicidad

INTRODUCTION

ALDS is globally used for the treatment and/or prevention of postmenopausal osteoporosis and glucocorticoid-induced osteoporosis1. It belongs to BCS III class (high solubility and low permeability). Low oral bioavailability (under 1%) is one of the most important disadvantages of ALDS. That is caused by several factors such as low permeability due to its negatively charged molecules (AL belongs to the 3rd class of biopharmaceutical classification system); short plasma half-time (t½ 0.5-2 h)2 and its chelation by Ca2+ ions which results in non-absorbable complexes.

There is a need to develop more efficient delivery systems of ALDS to avoid the upper gastrointestinal tract irritation3. Symptoms of upper gastrointestinal tract irritation including esophagitis, vomiting, epigastric pain, nausea, and dyspepsia, have been reported with use of ALDS sodium tablets. Esophageal adverse effects have been reported with use of ALDS tablet, some of which were more severe and dangerous than that observed in controlled clinical trials. It is important to note that some cases of esophagitis and also esophageal ulceration were related to ALDS tablet use; many of these cases have occurred in patients who did not follow the recommended instructions or who continued using ALDS in spite of worsening esophageal symptoms. About 50% of patients discontinue taking ALDS tablets during the first year of treatment due to its gastrointestinal tract (GIT) side effects.

Research on ALDS is a challenge as its quantitative determination is sophisticated From the analytical point of view, sodium ALDS assay is a difficult task due to the lack of chromophores absorbing photons between 200 and 800 nm4. One of the most promising delivery systems is liposomes formulations. The liposome is one of the potential drug delivery systems applying nanotechnology to potentiate the therapeutic efficacy and reduce toxicities of conventional medicines, they are consist of lipid vesicles from natural and synthetic phospholipids of different sizes, loading capacities, and compositions. They are defined as vesicular structures consisting of amphiphilic, in vivo degradable phospholipids and can thus encapsulate a broad range of effective agents, that effective agents may have hydrophilic, lipophilic or even amphiphilic nature. There are three main categories of liposomes: small unilamellar vesicles, large unilamellar vesicles, and multilamellar vesicles.

That classification is based on liposomes lamellarity and size. Liposomes have been used as carrier systems for the delivery of vaccines, hormones, and therapeutic drugs, due to the easy preparation, biodegradability, good biocompatibility, and commercial availability of liposomes5. Earlier studies have discovered that liposomal drug delivery systems improved the cellular absorption of highly hydrophilic drugs such as acyclovir and cefotaxime6. Nanoparticles may be comprised of several kind materials being classified as nondegradable and biodegradable7.

Recently, Polysaccharide-based nanoparticles have received high attention as very promising nanoparticulate drug delivery systems due to their unique potentials as inert excipient biopolymer8. The use of starch nanoparticles is, therefore, receiving a significant amount of attention due to their good biocompatibility and biodegradability9. Starch is relatively pure and does not need much purification processes like other naturally- occurring biopolymers e.g. celluloses and gums10.

By optimizing the right combination of liposomal and polymer characteristics, it is possible to develop delivery systems for the specific, prolonged, and controlled release11. High amylose corn starch has high sustained release properties due to its excellent gel-forming capacity12. The mechanism of drug release from such gel-forming matrix assumes a controlled passage of drug molecules through the obstructive gel layer, gel structure, and matrix. When starch granules are heated in the aqueous environment, granules start swelling and gelatinization takes place at about 55- 80°C depending on the type of starch used13. Upon cooling starch, it begins to undergo retro gradation whereby the starch molecules begin to re-associate in an ordered structure. Cross-linked starch nanoparticles were used for drug delivery and Indomethacin was taken as the model drug14. Recently, efforts were made to develop alternative formulations for the oral administration of ALDS, with a goal of decreasing GI adverse events and possibly increasing compliance15.

MATERIALS AND METHODS

Materials

aLDS was a gift from Unipharma Pharmaceutical Industries (Egypt). Soya bean phosphatidylcholine, cholesterol, and 2-mercaptoethanol (2ME) were purchased from Sigma-Aldrich (USA). Starch was kindly supplied by Starch and Glucose Company (Egypt). Chloroform, methyl alcohol, and sodium hydroxide were obtained from El-Nasr Pharmaceutical Co. (Egypt). All other chemicals and reagents used were of pharmaceutical grade.

Methods

Quantitative analysis of ALDS

Double distilled water was used for the preparation of all solutions.

-Preparation of standard stock and test solutions:

The stock solution was prepared by dissolving 10 mg of ALDS sodium in 10 ml of 0.05 M NaOH and the prepared solution is used with 48 hours. The working solution of the derivatizing reagent was prepared by dissolving 10 mg of o-phthalaldehyde (OPA) in 2 ml of 0.05 M NaOH, then 50 μl of 2-mercaptoethanol (2ME) solution were added. This solution was freshly prepared for each experiment.

The total solution volume was completed to 10 ml using 0.05M NaOH. Aliquots (0.0, 0.4, 0.8, 1.2, 1.6, 2 and 2.4 μM) of this solution were transferred to a 2ml vial. 100 µl of the OPA/2ME reagent was added to each vial and then the volumes were completed to 2 ml with 0.05 M NaOH. 1mg/ml ALDS solution was prepared using 0.05 M NaOH as a solvent.

-Spectrofluorometric determination of ALDS:

The reported methods for quantitation of ALDS are all expensive and time-consuming16. The procedure used in this study was based on the reaction of a primary amino group of ALDS ion with o-phthalaldehyde (OPA) in alkaline medium giving a fluorescent adduct according to the following equation17:

A calibration curve was constructed by plotting fluorescence intensity (in arbitrary units) versus concentration. The linear portion of the curve lies within the concentration range of 0.0-2.4 μM where the inner-filter effect was minimum. The limit of quantification of the method was 29 nanomolar as reported earlier.

-Preparation of calibration curve:

Liposomes were prepared by a modified thin film hydration method18. Phosphatidylcholine (0.6 g) and cholesterol (0.2g) were mixed and then the mixture was dissolved in chloroform/methanol mixture (in a volume ratio 2:3)19. The resulting mixture was dried up to thin lipid films on the inner wall of the flask using a rotary evaporator under vacuum. ALDS (50 mg) was dissolved in 10 ml isotonic NaCl solution, then different amounts of starch were added in incremental amounts (0.0 g to 0.5 g) with proper mixing, and the solution was heated at 55 to 65ºC for 10 to 15 min. The produced lipid thin film was hydrated with the prepared ALDS sodium solution and agitated for a suitable period above 65ºC using rotary evaporator. Samples were sonicated for few minutes and centrifuged at 18000 rpm for 30min. Finally, separation of supernatant has been performed.

Preparation of liposomes

Liposomes were prepared by a modified thin film hydration method18. Phosphatidylcholine (0.6 g) and cholesterol (0.2g) were mixed and then the mixture was dissolved in chloroform/methanol mixture (in a volume ratio 2:3)19. The resulting mixture was dried up to thin lipid films on the inner wall of the flask using a rotary evaporator under vacuum. ALDS (50 mg) was dissolved in 10 ml isotonic NaCl solution, then different amounts of starch were added in incremental amounts (0.0 g to 0.5 g) with proper mixing, and the solution was heated at 55 to 65ºC for 10 to 15 min. The produced lipid thin film was hydrated with the prepared ALDS sodium solution and agitated for a suitable period above 65ºC using rotary evaporator. Samples were sonicated for few minutes and centrifuged at 18000 rpm for 30min. Finally, separation of supernatant has been performed.

Determination of vesicle size

After dilution with water, both vesicles size and size distribution were determined by the dynamic light scattering method using a Malvern Mastersizer(UK).

Zeta potential determination

Zeta potentials of liposomes were determined from electrophoretic mobility of the particles using an instrument model Malvern Zetasizer 2000(Malvern, UK) [27].

Entrapment efficiency (EE) determination

The liposomes were separated from the supernatant then the concentrations of ALDS in isotonic NaCl solutions were determined spectrofluorometrically after derivatization using spectrofluorometry (Shimadzu, Kyoto, Japan) at lmax 470 nm.20 The entrapment efficiency expressed as entrapment percentage was calculated using the following equation:

Entrapment Efficiency % = (Entrapped drug / Total drug) × 100

In vitro drug release study

The drug release studies were carried out in 250 ml beakers containing phosphate buffered saline pH 7.4 as at 37 C, absorption was found to be chiefly in the upper part of the small intestine and hence pH 7.4 is more consistence with the small intestine pH. The beaker content was constantly stirred at 150 rpm with a small magnetic stirrer. Dialysis membrane was taken and one end of the membrane was sealed. After separation of entrapped ALDS liposome dispersion was filled in the dialysis membrane and another end was closed. The dialysis membrane containing the sample was suspended in the medium. Aliquots were withdrawn (5 ml) at selected time intervals (0.5, 1, 2, 3, 4, 6, 8 and 24 h), filtered and the apparatus was immediately replenished with the same quantity of fresh buffer medium. The Aliquots were measured for the amount of the drug by using the previous stated derivatizing agents, all reagents are freshly prepared.

Stability study

The in vitro stability was tested for two prepared liposomes formulations F1 (free starch liposomes) and F6 (liposomes with the highest concentration of starch) by monitoring the particle size and zeta potential for over one month at storage temperatures of 4-8 C and 20-25C. To determine the capability of the prepared formulas to retain the drug within the vesicles throughout the storage period, F1 and F6 were centrifuged and the entrapment efficiency was determined as described earlier in the entrapment efficiency determination section.

Transmission electron microscopy (TEM)

The optimum prepared liposome formula (F6) morphology was visualized by transmission electron microscopy (TEM). The prepared liposomes were diluted with double-distilled water then one drop of the prepared formula was added onto hydrophobic carbon. The samples were air dried for few minutes at room temperature. The specimens were stained with uranyl acetate for 4 min and the excess amount of uranyl acetate was blotted using filter paper. After drying, the liposomes on a hydrophobic carbon grid were directly observed and photographs were captured using Transmission Electron Microscope (JEOL Ltd., Tokyo, Japan).

Ulcerogenicity study

Based on the entrapment efficiency, stability and in vitro drug release studies; F6 was selected to be compared with alendronate solution of the same concentration. The ulcerogenicity study was performed for both of them to evaluate their gastric -ulcerogenic potential. Three groups (A, B and C) of rats were administered each consist of 6 rats, rats weights were ranging between 150 and 200 gm. Group A represented the control group, group B represented F6 receiving rates while group C represented rats which received non-liposomal alendronate solution. Observation of the gastric mucosa for the presence of lesions following oral administration of 20 mg/kg of the tested formulas was used as an indication for the ulcerogenic effects. The rats in group B and C were administered alendronate (20 mg/kg) for 7 days, while group A rats were receiving saline, then all the rats have been killed, the stomachs have been removed, and the extent of tissue damage was evaluated microscopically. Ulcer index was calculated to analysis the effect on the stomach mucosa. The ulcer index represents the total sum of Ulcers numbers, incidence percentage and severity of the resulted ulcers after the oral administration the drug.

Results and discussion

Analytical procedure

ALDS sodium has no characteristic absorption or emission chromophores, so its estimation represents a challenge20 due to the lack of chromophores absorbing photons between 200 and 800 nm. The reactions of OPA with amino compounds in the presence of nucleophilic agents to give isoindole derivatives are used for the analytical determination of primary amines and amino acids.

Calibration curve

Figure 1 shows a calibration curve, based on plotting OPA- ALDS adduct fluorescence intensity versus ALDS concentration. The calibration curve was linear over the concentration range of 0.0-2.4 μM and the limit of quantification of the method was 29 nanomolar that is comparable with the previous studies21.

Figure 1 Calibration curve based on OPA- ALDS adduct fluorescence intensity versus ALDS concentration. 

Vesicles size analysis

Liposomes particle sizes ranged from 94 nm to 298 nm and that range was increasing with elevating starch concentration as illustrated in table 2. This wide size distribution range may indicate liposomes aggregation22.

Table 1 Liposomes formulations 

Formula no. Phosphatidylcholine (gm( Starch (g ( Cholesterol (g (
1 0.6 0 0.2
2 0.6 0.1 0.2
3 0.6 0.2 0.2
4 0.6 0.3 0.2
5 0.6 0.4 0.2
6 0.6 0.5 0.2

Table 2 Particle size distribution of the prepared liposomes 

Formula no. Starch concentration (%) Particle size (nm) Mean polydispersity index(PDI)
1 0 94±4.3 0.27±0.7
2 0.1 191±6.1 0.14±0.9
3 0.2 225±5.9 0.17±0.8
4 0.3 242±7.1 0.19±0.4
5 0.4 278±2.2 0.29±1.3
6 0.5 298±3.5 0.07±0.2

It is noticed that with increasing starch concentration there is a relative increase in the size of liposomes that may be attributed to the formation of the starch outer layer around liposomes vesicles that results are comparable with previous studies which investigated the effect of natural polymers incorporation on liposomes physical characters23.

Zeta potential

Zeta potential has frequently been used to characterize colloidal drug delivery systems. It is a measure of the particles surface electrical charge. The zeta potential is a good indicator of the stability of the colloidal system. If all the particles in suspension have a large positive or negative zeta potential, then they will repel each other, and there will be no affinity for the particles to agglomerate. The Zeta potential is a significant parameter which influences liposomal behavior. In vivo, the surface charge density influences the liposomes' distribution, and in vitro, a high potential may contribute to the liposomes physical stability by decreasing the rate of aggregation. ALDS liposomes without starch showed a slight negative zeta potential, in agreement with early reports24.

It was obvious that coating of liposomes by starch shifted the zeta potential values, from slightly negative to larger negative. The results show that liposomes had relatively large zeta values after being coated with 0.1–0.5% w/v starch solutions. The liposomes had a zeta potential ranging from -12 mV to -39 mV as shown in table 3 giving good stability of the liposomes25.

Table 3 Zeta potentials of liposomes formulas 

Formula Formula no. Zeta Zeta SD Zeta potential (-mV) Data Data retention (%)
1 -12±0.49 91
2 -22±1.67 87
3 -25±0.76 68
4 -29±1.81 86
5 -34±1.1 89
6 -39±2.19 94

Entrapment efficiency (EE)

Concerning the effect of starch content on the liposome encapsulation efficiency of ALDS, results showed that the percentage entrapment efficiency of ALDS increased by increasing starch content. The percentage entrapment efficiencies of ALDS liposomes were 46.5%, 60.9%, 67.2%, 72.1%, 76.3% and 78.5% for the starch concentration ratios of 0 %, 0.1%, 0.2%,0.3%,0.4%, and 0.5% respectively as shown in Table 4.

Table 4 Percentage entrapment efficiency (EE%) of ALDS by liposomes of different starch concentrations 

Liposomal formula Entrapment efficiency (% w/w) ± SD
1 46.5 ±1.89
2 60.9 ±3.05
3 67.2 ±1.63
4 72.1 ±1.89
5 76.3 ±1.51
6 78.5 ±1.32

EE% is used to evaluate the effect of using different concentrations of starch during formulation. According to previous results, upon increasing the starch content, the nanoliposomes become more stable and the permeability decreases. This leads to more drug retention due to drug entrapment through the obstructive gel matrix26. The same results were obtained when other natural polymers such as chitosan are used in the liposome preparation.

The In vitro release study

The drug release study from the six nano-liposomal formulations was studied and compared to the pure drug as shown in (Fig. no. 2). Liposomal formulation exhibit slow release that may be attributed to the rigidity of the liposome membrane which will increase permeability barrier and so reduce the drug loss rate. Moreover, It was found that the formulation F1 which is starch free has faster release comparing with the formulation that contains starch that maybe due to the sterical surface protection which slows down the macromolecules adsorption to the liposomal surface and hence starch suppresses clearly the elimination of the drug-carrying system from blood by the phagocytes.

Figure 2 in vitro drug release curve representing cumulative drug release for the pure drug formula and the other sex prepared formula (F1 to F6) 

The stability of liposomes at two different storage temperature ranges, 4-8 C, and 20-25 C, was evaluated in terms of size, zeta potential, and entrapment efficiency. As shown in Table 5, F6 stored at 4-8 C did not show any significant change in the amount of entrapped drug; but around 11.5 % drug was lost when stored at 20-25 C for one month while F1 formula after storage at 4-8 C showed a negligible change in the amount of entrapped drug while after storage at 20-25 C about 21.5% drug was lost. Thus at a higher temperature, ALDS was leaching out of the liposomes, that is consistent with earlier observations that at a higher temperature, the permeability and the fluidity of phospholipid bilayer increases27. Earlier reports showed that coating with natural polymers confers stability and enhances the dispersability of particulate systems in water. This may explain the stability of the F6 formula compared with F1.

Table 5 Particle size, zeta potential, and entrapment efficiencies for F1 and F6 liposomal formulas 

Liposomal formula F1 F6
Stage initial After one month Initial After one month
Temperature 4-8 °C 20-25°C 4-8 °C 20-25 °C
Particle size (nm) 94-170 98-178 103-184 110-1906 134-1993 154-2057
Zeta potential (mV) -12±0.49 -10±0.89 -8±0.25 -39±2.19 -33±.67 -27±1.28
Entrapment efficiency (%) 46.5±1.89 43±1.19 25±2.16 78.5±1.32 74.5±1.42 67±0.51

After one month storage of both F1 and F6, there was a slight increase in the particle size of F6 while there was no significant change in the particle size of F1, confirming the colloidal stability of F1 and F6 formulations. The slight change in the particle size of F6 may be attributed to the slight agglomeration of liposomes. While the zeta potential of F1 didn't show significant change, the zeta potential of F6 showed slight decrease that might be attributed to the coated layer dissociation.

TEM

Liposome morphology was visualized by TEM. Figure 3 shows a liposome outer shape images of the optimum formula (F6) under different magnification power. Cumulative data obtained by TEM showed that the vesicles are well-defined and spherical in shape. There is an agglomeration of excess amounts of starch as appeared in the images, the excess amount of starch was incorporated randomly in the voids between liposomes and results in few agglomerations, that result usually occurred upon using of natural polymers such as starch and chitosan during liposomes preparation28.

Figure 3 TEM images showing ALDS liposomes (F6) with different magnification scale. 

Ulcerogenicity study

The results showed that Formula 6 has superior safety and gastric tolerability compared to the pure drug as shown in table 6 and fig. 4. Clearly, Formula 6 demonstrated a remarkable enhancement in ulcer index (UI = 3.05) in comparing with an Alendronate solution (UI = 13.21). Encapsulation of several orally taken active ingredients in liposomes provides protection against both intestinal and gastric ulceration29. Our results were in agreement with Soehngen et al., who proved that the liposomal encapsulation of indomethacin provides an obvious protection against ulceration when it was orally administered to rats30 and also other studies have illustrated that liposomal encapsulation may have a clear effect on reducing GIT side effects e.g ulceration31. Furthermore, starch has an effect for stomach protection, acts as a demulcent and also has a soothing effect on the GIT mucosa32.

Table 6 Ulcerogenic effects of F1 and F6 

Formula Number of ulcers (average) Ulcer index*
Pure drug 6.5 13.21
6 0.6 3.05
Control - Nil

*

Figure 4 Pictures of rats stomach mucosa treated with F6(c) compared to F1(B) and control(A)The decrease in side effects of the newly prepared formulas due to several factors including:(i) The syrup-like nature of the current formulas, being of viscous mass, may remain in the first portion of the intestine for a longer time and if administered after cooling in a refrigerator, improved palatability is expected. This also reduces the transit time and hence increases the patient compliance(33).(ii) Colloidal starch has a soothing effect on the stomach and hence decrease the potential gastric upset(34)(ii) ALDS is irritating for stomach(35), and its entrapment into the liposome may have an effect on decreasing its potential side effects. 

CONCLUSION

In an attempt to develop an oral liposomal delivery system, natural polymer (starch) was used as means of improving liposomal properties. The liposomes of ALDS were prepared using phosphatidylcholine /cholesterol and different amounts of starch. ALDS /starch mixture was entrapped into the vesicles and excess starch coated the vesicles leading to further improvement of encapsulation efficiency and in-vitro stability. Formulation F6 showed high encapsulation efficiency with minimum particle size and drug release over an 8 h. Furthermore, F6 has shown better gastric tolerability in comparison with the pure drug. Consequently, this new formula of liposomes appears to be an effective drug delivery system for alendronate and with better tolerability and supposed to give greater bioavailability. It is predicted that the novel prepared formulas have fewer side effects due to several factors including:

  • (i) The syrup-like nature of the current formulas, being of viscous mass, may remain in the first portion of the intestine for a longer time and if administered after cooling in a refrigerator, improved palatability is expected. This also reduces the transit time and hence increases the patient compliance33.

  • (ii) Colloidal starch has a soothing effect on the stomach and hence decrease the potential gastric upset34

  • (ii) ALDS is irritating for stomach35, and its entrapment into the liposome may have an effect on decreasing its potential side effects.

Acknowledgments

This work was supported by the pharmacological departmental grant.

REFERENCES

1. Iyer RN, Purohit V, Karankumar J, Ahluwalia AK. Assessment of efficacy, safety and quality of life in postmenopausal women with osteoporosis using salmon calcitonin nasal spray. Asian J Pharm Clin Res. 2013;6(2):117-9. [ Links ]

2. Ochiuz L, Peris J-E. Preparation and characterisation of alendronate-loaded chitosan microparticles obtained through the spray drying technique. Medicinal chemistry. 2009;5(2):191-6. [ Links ]

3. Han H-K, Shin H-J, Ha DH. Improved oral bioavailability of alendronate via the mucoadhesive liposomal delivery system. European Journal of Pharmaceutical Sciences. 2012;46(5):500-7. [ Links ]

4. Kuljanin J, Janković I, Nedeljković J, Prstojević D, Marinković V. Spectrophotometric determination of alendronate in pharmaceutical formulations via complex formation with Fe (III) ions. Journal of pharmaceutical and biomedical analysis. 2002;28(6):1215-20. [ Links ]

5. Maurer N, Wong KF, Stark H, Louie L, McIntosh D, Wong T, et al.. Spontaneous entrapment of polynucleotides upon electrostatic interaction with ethanol-destabilized cationic liposomes. Biophysical Journal. 2001;80(5):2310-26. [ Links ]

6. Law S, Huang K, Chiang C. Acyclovir-containing liposomes for potential ocular delivery:corneal penetration and absorption. Journal of controlled release. 2000;63(1):135-40. [ Links ]

7. Saritha K, Saraswathi U, Singaravelu G, Revathi S, Jayanthi V. Biological synthesis and characterization of gold nanoparticles using Lemna minor. Asian J Pharm Clin Res. 2014;7(2):165-7. [ Links ]

8. Bodnar M, Hartmann JF, Borbely J. Preparation and characterization of chitosan-based nanoparticles. Biomacromolecules. 2005;6(5):2521-7. [ Links ]

9. Namazi H, Fathi F, Heydari A. Nanoparticles based on modified polysaccharides. The delivery of nanoparticles: InTech; 2012. [ Links ]

10. Ochubiojo EM, Rodrigues A. Starch: from food to medicine: INTECH Open Access Publisher; 2012. [ Links ]

11. Haidar ZS, Tabrizian M. Core–shell polymeric nanomaterials and their biomedical applications. Nanotechnologies for the Life Sciences. 2011. [ Links ]

12. Te Wierik G, Eissens A, Bergsma J, Arends-Scholte A, Bolhuis G. A new generation starch product as excipient in pharmaceutical tablets:III. Parameters affecting controlled drug release from tablets based on high surface area retrograded pregelatinized potato starch. International journal of pharmaceutics. 1997;157(2):181-7. [ Links ]

13. Van Beynum GMA, Roels J. Starch conversion technology. 1985. [ Links ]

14. Simi C, Abraham TE. Hydrophobic grafted and cross-linked starch nanoparticles for drug delivery. Bioprocess and biosystems engineering. 2007;30(3):173-80. [ Links ]

15. Brandi ML, Black D. A drinkable formulation of alendronate:potential to increase compliance and decrease upper GI irritation. Clinical Cases in Mineral and Bone Metabolism. 2013;10(3):187. [ Links ]

16. Gupta VK, Jain R, Sharma S, Agarwal S, Dwivedi A. Quantitative determination of alendronate in human urine. Int J Electrochem Sc. 2012;7:569-87. [ Links ]

17. Ezzati Nazhad Dolatabadi J, Hamishehkar H, de la Guardia M, Valizadeh H. A fast and simple spectrofluorometric method for the determination of alendronate sodium in pharmaceuticals. Bioimpacts. 2014;4(1). [ Links ]

18. Dua J, Rana A, Bhandari A. Liposome:methods of preparation and applications. Int J Pharm Stud Res. 2012;3(2):14-20. [ Links ]

19. Shenyang Pharmaceutical University soDoP. LABORATORY 10: Preparation of liposomes and determination of encapsulation efficiency 2014. [ Links ]

20. Sultana S, Talegaonkar S, Mittal G, Bhatnagar A, Ahmad FJ. Determination of Alendronate Sodium by Box-Behnken Statistical Design. Chromatographia. 2010;72(3-4):321-6. [ Links ]

21. Dolatabadi JEN, Hamishehkar H, de la Guardia M, Valizadeh H. A fast and simple spectrofluorometric method for the determination of alendronate sodium in pharmaceuticals. BioImpacts. 2014;4(1):39. [ Links ]

22. Nahar K, Absar S, Patel B, Ahsan F. Starch-coated magnetic liposomes as an inhalable carrier for accumulation of fasudil in the pulmonary vasculature. International journal of pharmaceutics. 2014;464(1):185-95. [ Links ]

23. Mady MM, Darwish MM. Effect of chitosan coating on the characteristics of DPPC liposomes. Journal of Advanced Research. 2010;1(3):187-91. [ Links ]

24. Hosny KM, Ahmed OAA, Al-Abdali RT. Enteric-coated alendronate sodium nanoliposomes:a novel formula to overcome barriers for the treatment of osteoporosis. Expert opinion on drug delivery. 2013;10(6):741-6. [ Links ]

25. Wissing S, Kayser O, Müller R. Solid lipid nanoparticles for parenteral drug delivery. Advanced drug delivery reviews. 2004;56(9):1257-72. [ Links ]

26. Abdelbary A, Salem HF, Khallaf RA, Ali AM. Mucoadhesive niosomal in situ gel for ocular tissue targeting:in vitro and in vivo evaluation of lomefloxacin hydrochloride. Pharmaceutical Development and Technology. 2017;22(3):409-17. [ Links ]

27. Bai S, Ahsan F. Inhalable liposomes of low molecular weight heparin for the treatment of venous thromboembolism. Journal of pharmaceutical sciences. 2010;99(11):4554-64. [ Links ]

28. Guo J-x, Ping Q-n, Jiang G, Huang L, Tong Y. Chitosan-coated liposomes:characterization and interaction with leuprolide. International journal of pharmaceutics. 2003;260(2):167-73. [ Links ]

29. Torchilin VP. Recent advances with liposomes as pharmaceutical carriers. Nature reviews Drug discovery. 2005;4(2):145-60. [ Links ]

30. Soehngen EC, Godin-Ostro E, Fielder FG, Ginsberg RS, Slusher MA, Weiner AL. Encapsulation of indomethacin in liposomes provides protection against both gastric and intestinal ulceration when orally administered to rats. Arthritis & Rheumatism. 1988;31(3):414-22. [ Links ]

31. Fukui T, Kawaguchi AT, Takekoshi S, Miyasaka M, Tanaka R. Liposome-Encapsulated Hemoglobin Accelerates Skin Wound Healing in Mice. Artificial organs. 2012;36(2):161-9. [ Links ]

32. Topping DL, Fukushima M, Bird AR. Resistant starch as a prebiotic and synbiotic:state of the art. The Proceedings of the Nutrition Society. 2003;62(1):171. [ Links ]

33. Bateman D. Effects of meal temperature and volume on the emptying of liquid from the human stomach. The Journal of physiology. 1982;331:461. [ Links ]

34. Bosaeus I. Fibre effects on intestinal functions (diarrhoea, constipation and irritable bowel syndrome). Clinical Nutrition Supplements. 2004;1(2):33-8. [ Links ]

35. Peter C, Handt L, Smith S. Esophageal irritation due to alendronate sodium tablets (possible mechanisms). Digestive diseases and sciences. 1998;43(9):1998-2002. [ Links ]

Received: October 20, 2017; Accepted: February 02, 2018

Correspondencia Mohamed Mahmoud Nanomohamed2015@yahoo.com

Competing interest

The authors report no conflicts of interest in this work. The authors alone are responsible for the content and writing of this article

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution-Noncommercial-Share Alike 3.0 Unported, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.